The semi-wet material crusher is a new type of high-efficiency single-rotor reversible crusher, which has strong adaptability to the moisture content of the material, especially for the decomposed high-water content animal manure or straw before and after fermentation. The decomposed semi-finished organic fertilizer with a water content of ≤40% is crushed into powder particles, and the powder particle size can reach 20-40 mesh, which can meet the feed particle size requirements of fertilizer granulation equipment.
Application of semi-wet material crusher in organic fertilizer production line
The semi-wet material crusher is a professional crushing equipment for crushing semi-humid and multi-fibrous materials. The semi-wet material crusher uses high-speed rotating hammers for crushing operations. The particle size of crushed fiber is good, high efficiency and high energy. The semi-wet material crusher is mostly used in the production and processing of organic fertilizers, and it has a good effect on crushing raw materials such as animal manure and humic acid sodium.
The use of semi-wet material crusher as crushers in fertilizer granulation production lines is mainly determined by its five characteristics.
1. The semi-wet material crusher adopts a double-stage rotor for upper and lower stages of crushing. The material passes through the upper-stage rotor crusher into fine particles, and then is conveyed to the lower-stage rotor to continue pulverization into fine powder, achieved the best effect of feed powder and hammer powder. Finally, it is directly discharged from the discharge port.
2. The semi-wet material crusher does not have a sieve bottom, and more than a hundred kinds of materials can be crushed without clogging. Even the materials that have just been fished out of the water can be crushed, and will not be blocked by wet materials crushing, causing the motor to be burned out and affecting production.
3. The semi-wet material crusher adopts a high-alloy wear-resistant hammer head, and the hammer piece is made of forging, which is particularly strong and wear-resistant, stronger and more wear-resistant than ordinary hammer heads, and increases the service life of the hammer piece.
4. The semi-wet material crusher adopts two-way gap adjustment technology. If the hammer is worn, it does not need to be repaired, and the position of the hammer can continue to be used. The particle size of the material can be controlled by adjusting the gap between the hammer head and the liner.
5. The semi-wet material crusher adopts a centralized lubrication system for oil injection. Under normal operation, it can be injected with lubricating oil without stopping the machine, which is convenient and quick. Because the whole oil circuit is closed, it can prevent dust from invading and damaging the bearing.
Therefore, semi-wet material crusher are mostly used for material crushing before the organic fertilizer granulation process.
Post time: Jan-07-2023
